
Screen products for restricted chemicals and Substances of Very High Concern before they reach the EU market. QIMA provides REACH chemical testing through ISO/IEC 17025-accredited laboratories, with reports for buyers, retailers, and compliance teams.
REACH testing is laboratory analysis used to check whether a product contains substances restricted under EU REACH or listed on the Candidate List of Substances of Very High Concern (SVHCs). Testing covers the REACH requirements relevant to the product, including applicable Annex XVII restrictions and SVHC screening.
QIMA tests consumer products and materials through ISO/IEC 17025-accredited laboratories. Depending on the product category and testing scope, reports can support buyer, retailer, customs, and EU market-access documentation.
REACH chemical testing gives your team evidence to support product decisions before shipment. It can help you:
Identify applicable restricted substances before products leave the factory.
Screen for SVHCs and relevant Annex XVII substances.
Provide documented test results to buyers, retailers, and compliance teams.
Investigate materials, components, and finished products from your supply chain.
Reduce the risk of shipment delays, market withdrawal, and corrective retesting.
REACH testing can be designed around the materials, components, and intended use of your product. QIMA supports testing for a wide range of consumer product categories, including:
Jewelry and products containing metal components
Packaging and food-contact materials, where applicable
Textile products can contain restricted chemicals in dyes, finishes, coatings, prints, trims, fasteners, and packaging. QIMA can help textile manufacturers, importers, brands, and retailers identify the testing scope relevant to their materials and target market.
Testing can include checks for substances such as azo colorants, phthalates, nickel release, and other restricted chemicals. The final scope depends on the materials, components, intended use, and applicable requirements.
EU REACH, established under Regulation (EC) No. 1907/2006, regulates the use of chemical substances in the European Union. Product manufacturers, importers, and other supply-chain participants may have different obligations depending on the substance, product, role in the supply chain, and intended market.
REACH chemical testing helps identify whether relevant substances are present in a product or material. It does not replace the responsible company’s wider REACH assessment, registration, authorization, communication, labeling, or documentation obligations.
Annex XVII contains restrictions for specific substances and uses. The applicable restriction depends on the product, material, concentration, and intended use. QIMA can test against relevant Annex XVII requirements based on the product category and agreed scope.
The Candidate List identifies Substances of Very High Concern, including substances that are carcinogenic, mutagenic, or toxic to reproduction, substances that are persistent, bioaccumulative, and toxic, and substances presenting an equivalent level of concern.
QIMA can screen products and materials against the current SVHC scope used for testing at the time of the assessment. If the Candidate List changes after testing, a targeted review or additional analysis may be necessary.
Supplier-selected samples may not represent the full production run. When REACH testing is combined with a QIMA inspection, a QIMA inspector can collect product samples during a Pre-Shipment Inspection or During Production Check.
This connects laboratory analysis with what is being produced. It can also reduce the risk of relying only on samples selected and shipped by a supplier.
REACH testing checks products for substances listed under Annex XVII and the Candidate List of SVHCs. Depending on the substance, concentration, product, and applicable requirement, the importer or manufacturer may need to disclose information to customers or ECHA and may be subject to additional obligations or restrictions.

Below are some of the chemicals REACH regulates:
Annex XVII Restricted Substances
Phthalates
azo colorants in textiles
Nickel release from metal products in direct contact with skin
PCTs
Benzene
Asbestos fibers
Arsenic compounds
Mercury compounds
Cadmium
Candidate List of SVHCs (Substances of Very High Concern)
Carcinogenic, mutagenic, or toxic to reproduction (CMR)
Persistent, bioaccumulative, and toxic (PBT), or very persistent and very bioaccumulative (vPvB)
Identified, on a case-by-case basis, from scientific evidence as causing probable serious effects to human health or the environment of an equivalent level of concern as those above (e.g. endocrine disruptors).
REACH testing is most beneficial when the scope reflects the product and the samples reflect production. QIMA combines chemical laboratory testing with inspection and supply-chain support, helping you organize testing before products reach the EU market.
ISO/IEC 17025-accredited laboratories across Asia, Europe, and the Americas.
Testing available close to major production locations.
Scope covering SVHC screening and relevant Annex XVII restrictions.
Sample collection through QIMA inspection programs.
Book, track, and share test reports via myQIMA.
Testing programs that can be adapted to product category, materials, and target market.
QIMA supports 30,000+ businesses worldwide with a network covering more than 100 countries. For current turnaround information, request a quote based on your product category and testing scope.
The process depends on the product, materials, and scope selected. A typical REACH testing workflow includes the following steps.
Book your REACH testing via myQIMA and submit the product or material samples confirmed by your QIMA laboratory contact. We accept samples in over 40 countries across Asia, Europe, and the Americas. Your dedicated lab contact confirms receipt and opens your testing file within 1 business day - no paperwork queues, no ambiguity about what happens next.
What you need to provide:
3–5 representative product samples, where applicable. Your lab contact will confirm exact weights or volumes needed for the agreed testing scope.
Product description and material composition where known.
Target market and applicable REACH scope (Annex XVII restricted substances, SVHC Candidate List, or both - if unsure, QIMA recommends based on your product category).
Intended use and product category (e.g., textile, electrical & electronic equipment, toy, packaging, jewelry).
QIMA's ISO/IEC 17025-accredited laboratories analyze your samples against the current SVHC Candidate List and the Annex XVII restrictions applicable to your product category. You can request targeted analysis or a broader testing scope, and our technical team can advise based on your materials and target market.
QIMA delivers a structured PDF test report stating the agreed testing scope, methods, results, detected concentration levels where applicable, and specimen photographs. Reports are delivered through your myQIMA dashboard, where they can be accessed and tracked against your order.
Testing scope | Standard turnaround | Rush option |
SVHC Candidate List screening (targeted) | 5–7 business days | Available - confirm at booking |
Broader REACH scope (Annex XVII + SVHC) | 7–10 business days | Available for select substance groups |
Retest after corrective action | 3–5 business days | — |
Report delivery KPI | 96.3% on time | — |
All turnaround times run from confirmed sample receipt at the QIMA lab, not from the booking date.
If your product passes: Use the test report as part of your compliance records and documentation shared with relevant buyers, customs, retailers, or internal teams. The report can also be archived on myQIMA for instant retrieval by your supply chain team.
If your product fails: QIMA's report identifies the relevant substance, concentration, and material component where applicable. Your team can use the results to investigate the supplier, material, or production stage and decide whether corrective action or targeted retesting is needed. Retesting after corrective action typically takes 3–5 business days.
QIMA's lab testing integrates directly with its inspection programs. When a QIMA inspector visits your factory for a Pre-Shipment Inspection or During Production Check, they can collect product samples directly from the production line on your behalf. This gives you independently verified test specimens that reflect what was produced, rather than only what a supplier chose to send.
QIMA provides a laboratory test report describing the agreed testing scope, methods, results, and detected concentrations where applicable. The report can be stored in your compliance records and shared with relevant buyers, retailers, or internal teams.
Testing documentation should be considered alongside other product information, supplier records, technical files, declarations, and REACH obligations that apply to your role in the supply chain.
Candidate List Extension
On Nov 7, 2024, one new SVHC, triphenyl phosphate, was added to the Candidate List, bringing the list to 242 substances at that time.
The Candidate List changes over time. Confirm the current list and applicable testing scope before relying on older test results.
REACH testing is laboratory analysis used to identify restricted chemicals and Substances of Very High Concern in products or materials. The testing scope depends on the product category, materials, intended use, and target market.
Depending on the product and agreed scope, REACH chemical testing can include SVHC screening and testing for applicable Annex XVII restricted substances. The relevant scope should be confirmed before samples are submitted.
REACH requirements can affect many consumer products and materials, including textiles, apparel, footwear, jewelry, toys, furniture, electrical and electronic equipment, hardlines, and packaging. The applicable requirements depend on the product, materials, components, intended use, and supply-chain role.
Most standard REACH tests are completed within 5–10 business days from confirmed sample receipt at the lab. Targeted screening, broader testing, and retesting may have different timelines. Confirm the expected timing for your product and testing scope when booking.
For most products, 3–5 representative finished product units or material samples are sufficient. The exact quantity depends on product complexity and the number of materials being tested. Your QIMA lab contact confirms this at booking. Samples should be representative of the production batch you intend to sell into the EU market. Prototypes and pre-production samples are also accepted.
The report identifies the relevant result and, where applicable, the detected substance, concentration, and material component. Your team can then investigate the supplier, material, or production stage and decide whether corrective action or targeted retesting is needed.
Yes. QIMA's lab network in Asia means your samples can be tested close to the point of production, with no need to ship to Europe first. This can reduce transit time and help you receive your compliance documentation before your shipment departs.
Yes. You can combine REACH testing with RoHS testing, AQL inspection or social compliance audits for market readiness.
REACH testing is priced based on the number of samples, the substances in scope (targeted SVHC screening vs. full Annex XVII analysis), and the product category. A single-substance screen costs less than a comprehensive multi-material assessment. Get a quote for an exact figure based on your product - most clients receive pricing within 1 business day.
REACH Compliance Requirements - Read about REACH requirements and who is responsible for registering chemicals with ECHA.
Get a testing scope based on your product, materials, target market, and required timeline. QIMA can help you organize REACH chemical testing before your products reach the EU market.
By contacting QIMA you agree to our privacy policy and terms and conditions.